Shangyu Inger Field FAN

Shangyu Inger Field

YGW series of low noise roof fan

YGW series fans have been identified by experts. Has been widely used in power plants, rubber plants, automobile plants, motorcycle plants, chemical plants and food and beverage, paper industry, light industrial plants and senior civil construction of the exhaust, the majority of users are highly praised, fan impeller and shell, Hood can be based on user requirements using glass steel, aluminum, carbon steel and stainless steel and other materials.  Details » back to top»

Y-63 series fan

Y-63-type axial fan for chemical, paper and other factories transport 150 ℃ below the gas, and corrosive gases. The motor can be installed in the upper and left and right of the hairdryer can be adjusted to the center of the fan, the use of V-belt drive bearing box fixed in the duct and a shampoo and individual isolation. Fans made of steel plate welded, such as the transmission of corrosive gases, can be made of stainless steel, customers should be made in the loan requirements.  Details » back to top»

Side wall fan

Axial sidewall feed / exhaust fan with steel or aluminum forward-swept blades, blades made of ribs, increase strength, reduce low blade tip vibration, the rigid support under conditions to ensure that rapping of the member is less than the peak vibration velocity 4.6mm / s. The series of fans using the latest experimental results optimized, the smooth and smooth surface of the blade was streamlined; progressive cut into the air, and the air from the outer edge of the tilt angle design is reasonable, effectively reduce the separation from the turbulence. YGB-type side wall fan small size, simple structure, light weight, reliable operation, the motor in the air inside, good heat dissipation, extend the motor life.  Details » back to top»

Axial Fan

DFBZ type square wall axial fan DFBZ series fan has obvious high efficiency, low noise, smooth running characteristics, impeller made of aluminum alloy, widely used in industrial and mining enterprises, civil construction, gymnasium, a variety of entertainment venues wall exhaust, and has the following characteristics: 1 , The appearance of beautiful, easy to install, the whole machine made of square, before installation, the wall according to different machine number square hole, the installation, the fan from the wall into the wall hole, between the shell and the wall plug with rubber or Soft enough. 2, the fan by the outer wall side with aluminum alloy waterproof outlet, can prevent the outdoor rain and natural wind to the indoor irrigation. 3, the fan with a silencer shell, built-in sound-absorbing material, square as a whole installed firmly, vibration small, smooth operation, low noise.  Back to top »

DZ (SF) type low noise axial fan DZ series of low-noise axial fan of the Department of Xi'an Jiaotong University, starting from the sound source, low speed, high pressure coefficient design method, developed into wide leaves, large chord length, space twisted, tilted leaf shape, Under the premise of the required air volume, the purpose of wind pressure, with high efficiency, low noise, energy consumption, smooth operation characteristics. This series of products are widely used in mining enterprises, civil building wall exhaust, post air supply, roof ventilation, etc .; used in chemical industry, light industry, food, medicine, metallurgy and other industrial and mining enterprises and various types of civil ventilation and air conditioning system. By a large number of users to use the actual proof and expert appraisal, to give a high evaluation.  Back to top »

T35 (T40) type axial fan T35-11 system Axial ventilation fan is our 80 on behalf of the T30-11 on the basis of improved design of the new fan, it has obvious advantages compared with the T30-11 fan; ① structure is more reasonable; wheel is round Cylindrical, reduce the flow loss. The root strength of the blade is high; ② the performance is greatly improved; the total pressure efficiency is 89.5%, the noise (than the A sound level) is reduced by 3.6dB (A). This series of fans suitable for conveying non-explosive non-corrosive no significant dust of the gas, the ambient temperature shall not exceed 60 ℃, should be widely in the general factory, warehouse, office, residential ventilation or strong heating heat, but also in the larger Exhaust pipe in series to install in order to improve the pressure in the pipeline; unloading can also be done with free fan ...  Read more » Back to top»

Mixed flow fan

PYSWF (PYHL-14A) series of high-temperature smoke mixed-flow fan, is between the axial flow and centrifugal fan this a new type of fan, it has a centrifugal fan pressure, axial flow of large flow, high efficiency, energy , Low noise, easy installation and other characteristics, by the customer's praise. The product can run at about 400 ℃ ambient temperature for 100 minutes, both for wind and ventilation, but also from the dual role of high temperature smoke, for underground tunnels, underground shopping malls, underground storage and other fire facilities, by the design Homes and users of love.  Details » back to top»

Exhaust fan

HTF (A) type axial flow smoke exhaust fan HTF series of high temperature smoke exhaust fan by the Xi'an Jiaotong University and the common research and development, with high temperature performance, high efficiency, less than the centrifugal fan, easy installation and so on. Has been more than 20 cities nationwide high-level civil construction competing use.  Details » back to top»

HTF (B) type mixed flow fire exhaust fan HTF series of high temperature smoke exhaust fan by the Xi'an Jiaotong University and the common research and development, with high temperature performance, high efficiency, less than the centrifugal fan, easy installation and so on. Has been more than 20 cities nationwide high-level civil construction competing use.  Back to top »

Cabinet fan

YGX (HTFC) series cabinet centrifuge YGX (HTFC) series fan with box structure, double box box filled with silencer material, reduce noise, the board between the joints through the fixed, with a compact structure, beautiful appearance, easy installation and maintenance features. For days ventilation or fire smoke. According to the different motor position, YGX (HTFC) series is divided into two types A and B. A type for the electric surface in the box outside the B-type motor in the box. A-type fan according to G211-1999 "fire exhaust fan high temperature test method" requirements to meet the standard test requirements. Applicable to day fire smoke and ventilation machine.  Details » back to top»

Combined heating unit Cabinet air heating (cooling) unit functional sections are: the initial effect of the filter section, heating (cooling) section, the fan section. The unit is assembled at the factory and tested. Air conditioning unit filter using aluminum alloy early filter, filter class G3. Filter design and manufacture as required, stable and reliable performance, the filter frame using high-quality aluminum, with anti-corrosion. Filter all the filter are imported from abroad and undergo a rigorous screening, the product has a complete factory inspection to ensure its filtration efficiency and initial and final resistance parameters are in line with the relevant national standards to provide high quality air.  Details » back to top»

Series of centrifuges

4-72,479 Centrifugal Fan Application: large air volume low pressure to send exhaust and high temperature explosion and other air volume range: 1100-24000m 3 / h static pressure range: 400-3000pa Features: high strength design, long-term stable operation. Ye Lun 10 has a thin plate after tilting arc type blade combination, inlet system             into convergent streamlined whole, so that a more uniform gas velocity  detailed » top»

Y5-47 induced draft fan Y5-47 Boiler Centrifugal Exciter Machine with low noise and low structure is simple and flexible to adjust the air volume and wind direction. It is suitable for industrial boilers with various coal quality and equipped with smoke and dust removal devices. Conveying gas temperature ≤ 250 ℃. The fan drive with C-type D-type two, with water-cooled overall bearing and air volume adjustment door.  Details » back to top»

Y9-38 induced draft fan The Y9-38 boiler draft fan is suitable for the use of 0.5 to 35 t / h industrial steam boilers for various types of coal and with smoke and dust removal devices. Where the intake conditions are similar, performance and adapt to those who can choose, the maximum temperature of the media shall not exceed 250 ℃.  Details » back to top»

9-19,9-26 high pressure centrifuge This series of centrifuges for high pressure ventilation, conveying materials, conveying air, corrosive, material gas, and has a round line high speed, forward curved leaf type, convergent streamlined structure, no leakage, high structural strength, sealing performance Excellent, special wear-resistant layer to extend the use of life and so on.  Details » back to top»

8-09 high pressure centrifuge Applications: furnaces, blacksmith furnace, conveying gas and chemical blowing reform air volume range: 560-9000 Pressure range: 10600-22000pa features: 1, the unique and efficient design to the front fan theory, small size, light weight, Convenient             2, ultra-small than the speed of single-stage high-pressure, high efficiency area wide, low noise, safe and smooth operation  Details » Back to top»

4-68,473 Centrifugal fan This series of centrifuges for boilers, metallurgy, cement, chemical plants, paper, boiler pass can also be used for mine ventilation and general ventilation, and has a combination of 12 after the combination of leaves. Reliable operation. High efficiency, low noise, with the overall rationalization of the structure, small area convenient. Configuration fan flow cutting device, saving energy, easy to use and so on.  Details » back to top»

Fireproof valve series

Smoke proof valves (SMD-M) and composite fire smoke (FSD-M) air valves are suitable for HVAC systems requiring emergency smoke or fire / smoke control. When the temperature rises, the damper will automatically shut down to prevent the spread of flames and / or flue gas. The damper includes a manufacturer of actuators connected to a single junction box.  Back to top »

Manual adjustment valve series

Manual Balancing and Control The air valve is suitable for HVAC systems that require airflow regulation. The blade design structure allows maximum available space, thereby improving the performance of the damper. The damper can be installed in either airflow direction and is suitable for installation when the installation is subject to space constraints.

Read More

KURITA FAN

PF-16BTGUL  170/230W 4P 200/220V 50/60HZ 4080/4683m3/h

S-16BT4 220VAC/50HZ/220W

S-24B-1M 750W 950R.P.M  3PH/200V/50HZ S/N:S41106T

S-24B-1M 750W SER-NO:S41106T

PF-14BSD 1ф 100V 4P

DS-N075

DA-N075 7.5L/H

PF-16BSD 1.60/1.90A 4P 40cm PHASE 1 200V 170/250W 50/60HZ  ：PF-16BS2G 200V 4P 50/60HZ

KS-30T-5 3.7KW 200/220V 50/60HZ S/N.B38233S

PF-10BSD 1￠ 100V 4P

PF-12BSG ，：PF-12BS2G 72/88W 4P 1PH200V/50/60HZ

S-16BT4/220VAC/50Hz/200W

PF-24BTB 750W 380V 50HZ 950rpm  NO:P47021T ：PF-24BT4G 750W 380V/50HZ

PF-16BT4F 3PH 380V 50/60HZ 400W N5.5

：PF-16BT2F 3PH 200/220V 50/60HZ 400W

PF-12BSD 75/98W 200V/50/60HZ ：PF-12BS2G 200V 50/60HZ

PF-12AS2D 4P 1PH/200V50/60HZ

PF-16BS2G 255/264W 4P 1PH220V/50/60HZ

TYPE: PF-16BT4G  162W 400V/50HZ

PF-14AS1D AC100V

KS-31/2CT-24 5.5KW 3 380V 50HZ 6P S/N.B39242S

PF-12ASD 80/100W 1PH200V/50/60HZ ：PF-12AS2D

PF-16BTF：PF-16BT4F 400W 2P 380V/50HZ

38*PF1/4

PF-16BTBPF-16BT2B 220V

PF-16BTF，：PF-16BT2F 0.4KW 4P 3PH200V/50/60HZ

RV-20BT4G 400W 380V/50HZ

RV-56S 380V 50HZ S/N.R40065E

AG45

PE-16BTF 380V 50/60Hz 400w ：PF-16BT4F

KS-31/2CT-24 380V 6P S/N.B39242S1

PF16BS2G AC220V 50/60HZ

S-16BM  S-16BT2G 200V 50HZ

PF-12BSG  PF-12BS2G 200V 50HZ

PF-24BTA  PF-24BT2G 200V 50HZ

PF-24BTA 3ф 200VAC 750W

PF-12BSG 1ф 200VAC

S-16BM 3ф 200VAC

PF-24BT2B 3  750W 6 200V 50HZ 49pa  3.6A 155m3/min 950 ：P4768B7

PF-30BT2 Freq  50      phase 3  Output 1500   Plies 6 voltage 200   current 7.0  R.P.M 950  static pressure 49  airquantity 305 ser

PF-16BT4，4400V，220V，220VPT-16BT2G 200W 220V，220V。

PF-16BSD 175/250W 4P 220V/50/60HZ：PF-16BS2G

PF-10BSD 100V 4P

PF-14BT2G 200V 50/60HZ

TYPE:TP-12BS 50W/1 POLE 60HZ 1400RPM 110V 1.2A

AF-55S-2 440V 50HZ

KS-31/2CT-24 5.5KW S/N:B39242S

PF-16BT4F 400W 3PH.AC380V.50/60HZ

：PF-24ATA 220V 60HZ ：PF-24AT2G 220V 60HZ

PF-24BTB 750W 380V 50HZ 950rpm NO.P47021T ：PF-24BT4G 750W 380V/50HZ

PF-24BTB 750W 380V 950rpm

PF-24BTB 750W 950RPM 380V/50HZ S/N:P47021T ：PF-24BT4G 750W 380V/50HZ

PF-12BS2G 0.5/0.55A 4P 200V/72/88W 50/60HZ

PF-16BS2G 200V/50/60HZ ：A1597-02

FM-10A-1 S/N:P58247C 200V 50/60HZ

PF16BS2GAC220V

PF-10BSD 43/48W 100V/50/60HZ

PF-12BS2G 63/76W 4P 1PH200V/50/60HZ

S-16BT4-5 200/200V 50/60HZ

S-16BT4-5 200W 60/70M3/MIN 49PA

Type:S-16BT4M phase:3 Volt.200V S/N:S78158T

PF-12BSD 1.2/1.5A 4P 78/95W 50/60Hz

:PF-12BS1G  50/60Hz

PF-16BT4 220VAC

PF-12BS1D  71/91W  100V 50/60 HZ

PF-12ASD，：PF-12AS2D 200V

SP-100

PF-12BS2G 200V

Read More