Looking for MHP High-Ratio Hypoid Gears? Let us check the exact family and model range.
Customer: What is this product family?
KAYO: MHP is the high-ratio hypoid family. It uses an offset shaft arrangement, with right-hand gears and left-hand pinions. Its nominal module differs from the actual module; use the catalog drawing when designing the pair.
Customer: Which sizes can I review?
KAYO: The Japanese selection table lists 16 model codes for this article. Nominal modules: 1, 1.5. Tooth counts: 1, 2, 3, 45, 60. Representative dimensions are shown below. Mass is in kilograms.
| Model | Nominal module | Teeth | Outside diameter (mm) | Mass (kg) |
|---|---|---|---|---|
| MHP1-0453R | 1 | 45 | 48 | 0.15 |
| MHP1.5-0603R | 1.5 | 60 | 98 | 0.94 |
| MHP1-0451R | 1 | 45 | 48 | 0.16 |
| MHP1-0601R | 1 | 60 | 63 | 0.29 |
| MHP1.5-1060L | 1.5 | 1 | 17.7 | 0.77 |
Customer: How do I select the mating gear?
KAYO: Select the specified MHP gear and pinion combination, then confirm the catalog offset, mounting distances, ratio and bearing loads. Do not substitute an ordinary bevel pair.
Customer: What are the complete model codes?
KAYO: MHP1-0453R, MHP1-3045L, MHP1.5-0453R, MHP1.5-3045L, MHP1.5-0603R, MHP1.5-3060L, MHP1-0602R, MHP1-2060L, MHP1-0451R, MHP1-1045L, MHP1.5-0451R, MHP1.5-1045L, MHP1-0601R, MHP1-1060L, MHP1.5-0601R, MHP1.5-1060L.
Customer: What should I check during assembly?
KAYO: Confirm shaft alignment, bearing support, mounting distance, backlash and tooth contact. Select lubrication suitable for the exact material and operating conditions. Check the rated capacity against the actual speed, load and duty cycle.
Customer: What details should I send for an enquiry?
KAYO: Please send the complete model codes, quantity, mating gear, required ratio, shaft angle, bore or shaft requirements, speed and load. We can review the specification and availability for your application.
References: Official model selection table | KHK bevel range | MHP catalog. Confirm final dimensions against the latest manufacturer drawing.