KHK SSAG Ground Spur Gears without Hub
Looking for ground spur gears without hub?
KHK SSAG is part of the KHK standard gear range. A ground spur gear without a protruding hub for compact layouts.
What should I check when choosing this series?
Material: S45C carbon steel.
Module / pitch options: 1, 1.5, 2, 2.5, 3, 4, 5, 6.
Teeth across the listed models: 15–50.
Outside diameter across the listed models: 27–208 mm.
Examples from the model range
| Model | Module / pitch | Teeth | Outside diameter (mm) |
|---|---|---|---|
| SSAG1-25 | 1 | 25 | 27 |
| SSAG2-16 | 2 | 16 | 36 |
| SSAG2.5-30 | 2.5 | 30 | 80 |
| SSAG4-15 | 4 | 15 | 68 |
| SSAG6-30 | 6 | 30 | 192 |
Which models are included?
SSAG1-25, SSAG1-30, SSAG1-36, SSAG1.5-16, SSAG1.5-18, SSAG1.5-20, SSAG1.5-25, SSAG1.5-30, SSAG1.5-32, SSAG1.5-36, SSAG1.5-40, SSAG1.5-50, SSAG2-15, SSAG2-16, SSAG2-18, SSAG2-20, SSAG2-25, SSAG2-30, SSAG2-32, SSAG2-36, SSAG2-40, SSAG2-50, SSAG2.5-15, SSAG2.5-18, SSAG2.5-20, SSAG2.5-25, SSAG2.5-30, SSAG2.5-32, SSAG2.5-36, SSAG2.5-40, SSAG3-15, SSAG3-18, SSAG3-20, SSAG3-25, SSAG3-30, SSAG3-32, SSAG3-36, SSAG3-40, SSAG3-50, SSAG4-15, SSAG4-18, SSAG4-20, SSAG4-25, SSAG4-30, SSAG4-36, SSAG4-40, SSAG4-50, SSAG5-20, SSAG5-25, SSAG5-30, SSAG6-20, SSAG6-25, SSAG6-30
How do I select the correct gear?
Start with the module or circular pitch and number of teeth, then confirm the mating gear or rack, shaft bore, mounting dimensions and required load capacity. Dimensions and ratings vary by model. Check the individual drawing and operating conditions before ordering.