SUNTES DB-3010H Lever-Operated Mechanical Disc Brake
Customer: What is this product used for?
KAYO: This SUNTES disc brake is manually operated. Match the knob, lever or handle configuration to the intended installation.
Customer: Which specifications should I compare?
KAYO: Check the model-specific values below. Where a group has several variants, each column or row retains its own configuration. Lettered dimensions refer to the matching product drawing; a blank or dash does not state a value.
| Applicable disc outside diameter (mm) | φ200–∞ |
|---|---|
| Disc thickness (mm) | 10 |
| Effective braking radius (m) | r = ((Disc diameter)/2 －31 ) / 1000 |
| Lever tension※1 (N) | 835 |
| Maximum lever travel angle (°) | 33 |
| Maximum lever tension (N) | 1180 |
| Pad model | DB-0433 |
| Usable pad wear allowance (mm) | 7 |
| Pad friction coefficient (μ) | Dynamic: 0.3 Static: 0.15※2 |
| Overall lever ratio※1 | 16.4 |
| Mass (kg) | 7.8 |
Customer: Are there important operating notes?
KAYO: Bed in new pads to obtain the required braking torque. The stated friction coefficients apply after bedding-in.
Customer: How do I choose the correct version?
KAYO: Match the complete model, disc dimensions, mounting arrangement and operating duty. Check the required torque, speed, control pressure or electrical supply against the actual application.
Customer: What should I send for an enquiry?
KAYO: Send the model or nameplate photo, quantity, existing drawing, installation dimensions and operating conditions. For a replacement part, include the full brake or clamper code and photos of the existing component so that fit and configuration can be checked.