SUNTES DB-3038AF SA Pneumatic Disc Brake
Customer: What is this product used for?
KAYO: The spring applies the brake or clamp and air pressure releases it.
Customer: Which specifications should I compare?
KAYO: Check the model-specific values below. Where a group has several variants, each column or row retains its own configuration. Lettered dimensions refer to the matching product drawing; a blank or dash does not state a value.
| Model | DB-3038AF-01 DB-3038AF-11 DB-3038AF-21 | DB-3038AF-02 DB-3038AF-12 DB-3038AF-22 | DB-3038AF-03 DB-3038AF-13 DB-3038AF-23 | DB-3038AF-04 DB-3038AF-14 DB-3038AF-24 |
|---|---|---|---|---|
| Cylinder area (cm2) | 687.0 | |||
| Release air pressure (MPa) | 0.53–0.7 | 0.45–0.7 | 0.37–0.7 | 0.27–0.7 |
| Applicable disc outside diameter (mm) | φ600–∞ | |||
| Disc thickness (mm) | 50 or 75 or 100 | |||
| Effective braking radius (m) | r = ((Disc diameter)/2 －85 ) / 1000 | |||
| Pad model | DB-0455 | |||
| Usable pad wear allowance (mm) | 20 | |||
| Pad friction coefficient (μ) | Dynamic: 0.3 Static: 0.15※ | |||
| Lever ratio | 2.4 | |||
| Mass (kg) | Approx. 150 | |||
Customer: Are there important operating notes?
KAYO: Bed in new pads to obtain the required braking torque. The stated friction coefficients apply after bedding-in.
Customer: How do I choose the correct version?
KAYO: Match the complete model, disc dimensions, mounting arrangement and operating duty. Check the required torque, speed, control pressure or electrical supply against the actual application.
Customer: What should I send for an enquiry?
KAYO: Send the model or nameplate photo, quantity, existing drawing, installation dimensions and operating conditions. For a replacement part, include the full brake or clamper code and photos of the existing component so that fit and configuration can be checked.