Looking for AGDL Duplex Worm Wheels? Let us check the exact series, dimensions and mating component.
Customer: What is this product family?
KAYO: AGDL is the duplex worm wheel family for the corresponding duplex worms.
Customer: Which sizes are listed?
KAYO: The current Japanese selection table lists 38 model codes for this series. Modules: 1.5, 2, 2.5, 3, 3.5, 4, 5, 6. Wheel tooth counts: 20, 30, 36, 40, 50, 60. Representative dimensions are shown below; the complete model list follows. Mass is in kilograms.
| Model | Module | Wheel teeth | Outside diameter (mm) | Mass (kg) |
|---|---|---|---|---|
| AGDL1.5-20R1 | 1.5 | 20 | 34.5 | 0.10 |
| AGDL2-60R1 | 2 | 60 | 126 | 1.88 |
| AGDL3.5-30R1 | 3.5 | 30 | 115.5 | 2.51 |
| AGDL5-20R1S | 5 | 20 | 115 | 3.17 |
| AGDL6-60R1S | 6 | 60 | 378 | 20.9 |
Customer: Which mating component should I check?
KAYO: Select the corresponding KWGDL or KWGDLS duplex worm. Confirm the full codes, module system, lead direction, number of worm starts and specified center distance in the manufacturer selection chart. Similar-looking parts are not sufficient evidence of compatibility.
Customer: How do I confirm the reduction ratio?
KAYO: Use the selected wheel tooth count divided by the number of worm starts. Confirm the resulting pair against the manufacturer drawing and operating ratings before final selection.
Customer: What are the complete model codes?
KAYO: AGDL1.5-20R1, AGDL1.5-30R1, AGDL1.5-40R1, AGDL1.5-50R1, AGDL1.5-60R1, AGDL2-20R1, AGDL2-30R1, AGDL2-40R1, AGDL2-50R1, AGDL2-60R1, AGDL2.5-36R1, AGDL2.5-40R1, AGDL2.5-50R1, AGDL2.5-60R1, AGDL3-30R1, AGDL3-36R1, AGDL3-40R1, AGDL3-50R1, AGDL3-60R1, AGDL3.5-30R1, AGDL3.5-40R1, AGDL3.5-50R1, AGDL3.5-60R1, AGDL4-30R1, AGDL4-36R1, AGDL4-40R1, AGDL4-50R1, AGDL4-60R1, AGDL5-20R1S, AGDL5-30R1S, AGDL5-40R1S, AGDL5-50R1S, AGDL5-60R1S, AGDL6-20R1S, AGDL6-30R1S, AGDL6-40R1S, AGDL6-50R1S, AGDL6-60R1S.
Customer: What should I check before installation?
KAYO: Check shaft and bore fits, mounting dimensions, bearing support, tooth contact and backlash. Confirm lubrication and allowable loads for the actual speed, temperature and duty cycle. For a duplex pair, follow the specified axial adjustment procedure.
Customer: What details should I send for an enquiry?
KAYO: Please send the complete worm and wheel codes, quantity, required reduction ratio, center distance, bore or shaft requirements, speed, load and duty cycle. We can review the specification and availability for your application.
References: Official model selection table | KHK worm gear range | KHK mating and technical information. Confirm final dimensions and suitability against the latest manufacturer drawing.