Ogura provides electromagnetic particle and hysteresis units alongside passive torque controllers and specialty torque devices for winding, handling and equipment protection.
Controlled slip
OPC clutches and OPB brakes vary transmitted torque with applied current. HC and HB offer hysteresis control for lower torque. Select by the required torque range and allowable continuous slip heat at actual speed differential. Verify cooling, mounting orientation and operating speed for the specific size.
Passive and purpose-built products
PHT uses permanent-magnet hysteresis to provide repeatable torque. PET produces speed-dependent eddy-current torque. OPL provides powder-based limiting, while SCA is a special spring limiter. Ogura identifies the capper PHT design as custom production and lists the older OPC clutch sizes as discontinued.
Catalog models and specifications
| Series or designation | Configuration | Catalog sizes | Family torque range (N·m) |
|---|---|---|---|
| OPC-N/A | Micro particle clutch | 5N, 10N, 20N, 40N, 40A, 80N, 80A | 0.5–25 |
| OPB-N | Micro particle brake | 5N, 10N, 20N, 40N, 80N | 0.5–25 |
| OPB-N/F | Larger micro particle brake | 120, 250 | 0.5–25 |
| OPC | Legacy micro particle clutch (discontinued) | 10, 20, 40, 80 | 0.5–25 |
| HC | Hysteresis clutch | 0.5 | 0.05–4 |
| HC | Hysteresis clutch | 1.2, 2.5, 5, 10 | 0.05–4 |
| HC | Hysteresis clutch | 20 | 0.05–4 |
| HB | Hysteresis brake | 0.5 | 0.05–4 |
| HB | Hysteresis brake | 1.2, 2.5, 5, 10 | 0.05–4 |
| HB | Hysteresis brake | 20, 40 | 0.05–4 |
| PHT-S | Permanent hysteresis controller | 0.02, 0.05, 0.5 | 0.002–7 |
| PHT-D | Permanent hysteresis controller, small sizes | 0.02, 0.05, 0.5 | 0.002–7 |
| PHT-D | Permanent hysteresis controller, larger sizes | 1.2, 2.5, 5, 10, 30, 70 | 0.002–7 |
| PET | Eddy-current torque limiter (made to order) | 1.2, 2.5, 5, 10 | 0.02–1.0 |
| OPL-N | Particle limiter | 0.3, 0.6, 1.2, 1.8 | 0.03–0.4 |
| OPL-BN | Particle limiter | 1, 1.5, 2, 3, 4 | 0.03–0.4 |
| OPL-R | Particle limiter | 0.3, 0.6, 1.2 | 0.03–0.4 |
| OPL-BR | Particle limiter | 1, 1.5, 2, 3 | 0.03–0.4 |
| STC30 | Stepping clutch (made to order) | 1, 1.5, 2, 3, 4 | 1.5 |
| PHT | Capper torque controller, custom design | PHT20, PHT30, PHT40, PHT60 | See model table |
| SCA | Spring torque limiter, custom design | SCA 0.25, SCA 0.5, SCA 0.65 | 0.025–0.065 |
Custom capper torque controllers
| Model | Torque (N·m) | D (mm) | L (mm) |
|---|---|---|---|
| PHT20 | 2 | 85 | 57 |
| PHT30 | 3 | 85 | 92 |
| PHT40 | 3 | 85 | 86 |
| PHT60 | 6 | 118 | 104 |
SCA spring torque limiters
| Model | Torque (N·m) | Bore (mm) | Outside diameter (mm) | Length (mm) |
|---|---|---|---|---|
| SCA 0.25 | 0.025 | 6 | 18 | 23.5 |
| SCA 0.5 | 0.05 | 6 | 18 | 20.2 |
| SCA 0.65 | 0.065 | 6 | 20 | 19 |
Product images








Ogura provides electromagnetic particle and hysteresis units alongside passive torque controllers and specialty torque devices for winding, handling and equipment protection.
Controlled slip
OPC clutches and OPB brakes vary transmitted torque with applied current. HC and HB offer hysteresis control for lower torque. Select by the required torque range and allowable continuous slip heat at actual speed differential. Verify cooling, mounting orientation and operating speed for the specific size.
Passive and purpose-built products
PHT uses permanent-magnet hysteresis to provide repeatable torque. PET produces speed-dependent eddy-current torque. OPL provides powder-based limiting, while SCA is a special spring limiter. Ogura identifies the capper PHT design as custom production and lists the older OPC clutch sizes as discontinued.
Catalog models and specifications
| Series or designation | Configuration | Catalog sizes | Family torque range (N·m) |
|---|---|---|---|
| OPC-N/A | Micro particle clutch | 5N, 10N, 20N, 40N, 40A, 80N, 80A | 0.5–25 |
| OPB-N | Micro particle brake | 5N, 10N, 20N, 40N, 80N | 0.5–25 |
| OPB-N/F | Larger micro particle brake | 120, 250 | 0.5–25 |
| OPC | Legacy micro particle clutch (discontinued) | 10, 20, 40, 80 | 0.5–25 |
| HC | Hysteresis clutch | 0.5 | 0.05–4 |
| HC | Hysteresis clutch | 1.2, 2.5, 5, 10 | 0.05–4 |
| HC | Hysteresis clutch | 20 | 0.05–4 |
| HB | Hysteresis brake | 0.5 | 0.05–4 |
| HB | Hysteresis brake | 1.2, 2.5, 5, 10 | 0.05–4 |
| HB | Hysteresis brake | 20, 40 | 0.05–4 |
| PHT-S | Permanent hysteresis controller | 0.02, 0.05, 0.5 | 0.002–7 |
| PHT-D | Permanent hysteresis controller, small sizes | 0.02, 0.05, 0.5 | 0.002–7 |
| PHT-D | Permanent hysteresis controller, larger sizes | 1.2, 2.5, 5, 10, 30, 70 | 0.002–7 |
| PET | Eddy-current torque limiter (made to order) | 1.2, 2.5, 5, 10 | 0.02–1.0 |
| OPL-N | Particle limiter | 0.3, 0.6, 1.2, 1.8 | 0.03–0.4 |
| OPL-BN | Particle limiter | 1, 1.5, 2, 3, 4 | 0.03–0.4 |
| OPL-R | Particle limiter | 0.3, 0.6, 1.2 | 0.03–0.4 |
| OPL-BR | Particle limiter | 1, 1.5, 2, 3 | 0.03–0.4 |
| STC30 | Stepping clutch (made to order) | — | 1.5 |
| PHT | Capper torque controller, custom design | — | 1.5 |
| SCA | Spring torque limiter, custom design | — | 0.025–0.065 |
Product images







