The OSAWA Jumbo Wonder-Gun range consists of J-38, J-50 and J-75 mounting-type units for blow-off, suction and material transfer. The three models provide different minimum internal diameters and physical sizes. Their simple configuration is intended to be incorporated into a suitable handling arrangement. Compare the passage size, overall length and weight for the required installation instead of choosing solely by the model number.
Model coverage
J-38; J-50; J-75.
J-38
Configuration and use
This mounting-type unit supports blow-off, suction and material transfer.
Dimensions and specifications
| Length | 190mm |
| Minimum ID | 38mm |
| Weight | 1.8kg |
J-50
Configuration and use
This mounting-type unit supports blow-off, suction and material transfer.
Dimensions and specifications
| Length | 219mm |
| Minimum ID | 50mm |
| Weight | 2.5kg |
J-75
Configuration and use
This mounting-type unit supports blow-off, suction and material transfer.
Dimensions and specifications
| Length | 270mm |
| Minimum ID | 75mm |
| Weight | 4.0kg |
Performance and configuration graphics
Use the graphics below to identify the shown operating conditions and configuration. Shared family charts should be read against the specific model curve; a point on a chart is not a universal rating for every accessory or installation.
Selection and ordering
Specify the complete model designation, including mounting, set and hose-joint details. Check the actual material to be handled, nozzle access, hose routing and collection arrangement before choosing a configuration. A component list describes the contents of that particular set; it should not be assumed to apply to another suffix. Compare the performance graphics at the relevant supply condition, and confirm any custom nozzle or special-order requirements before preparing the final equipment specification.