These spring-applied brakes use an electromagnetic release. Yushin describes mounting arrangements with a single actuator, opposing units or units installed side by side.
Selection and installation
Check the planned friction face, pad alignment and travel allowance. The series can act on an appropriate side, end or outer face of the moving part, subject to the installation drawing. Yushin announced that the power connector formerly supplied with electromagnetic brakes would no longer be included in shipments from September 1, 2026. Check the connection arrangement when replacing an older installation.
Catalog ratings
| Model | Catalog braking force (N) | Catalog duty | Operating voltage | Coil power (W) |
|---|---|---|---|---|
| NGB-5 | 50 | Braking and holding | 24 V DC | 20 |
| NGB-10 | 100 | Braking and holding | 24 V DC | 29 |
| NGB-20 | 200 | Braking and holding | 24 V DC | 38 |
| NGB-40 | 400 | Braking and holding | 24 V DC | 60 |
| NGB-80 | 800 | Braking and holding | 24 V DC | 82 |
Dimensions and connections
| Model | Approx. envelope (mm) | Mounting bolt | Mass (kg) |
|---|---|---|---|
| NGB-5 | 105 × 55 × 75 | M8 | 2.0 |
| NGB-10 | 121 × 64 × 92 | M8 | 3.0 |
| NGB-20 | 152 × 84.5 × 113 | M10 | 5.0 |
| NGB-40 | 184 × 109 × 148 | M10 | 10.0 |
| NGB-80 | 236 × 134.5 × 184 | M12 | 20.0 |
The table reports Yushin’s catalog braking force. Operating pressure, pad condition and the effective friction radius affect available torque. Check holding torque, energy per stop and cumulative thermal duty for the actual machine. A dash denotes a value omitted from the catalog table.
YUSHIN product images




