EMP (E.M.P-Japan Ltd.) catalogs 7 models in this group. Compare the performance limits, electrical supply and physical interfaces for each model below.
Model selection
The MW-901EEA and MW-902EEA share EPDM and PP liquid-contact materials and an Rc1/8 port. Their listed maximum flows are 0.9 and 0.5 L/min respectively. The MS-W6 variants use Rc1/4 connections and cover 1.0 to 3.0 L/min with model-specific contact materials.
The AW pumps list separate air and liquid flow figures under the same model. The GS-6EA-AW lists 1.3 L/min for liquid and the GD-6EA-AW lists 1.6 L/min. For a system carrying both phases, check the expected liquid fraction, suction lift and discharge conditions against the pump curve.
Performance and electrical ratings
| Model | Max. flow (L/min) | Max. discharge (kPa) | Max. vacuum (kPa) | Rated voltage | Rated current (A) |
|---|---|---|---|---|---|
| MW-901EEA | 0.9 | 39.0 | -20.0 | 100 V AC | 0.15 |
| MW-902EEA | 0.5 | 18.0 | -10.0 | 100 V AC | 0.15 |
| MS-W6ST-R-10 | 2.0 | 290.0 | -45.0 | 100 V AC | 0.64 |
| MS-W6ST-L-07 | 1.0 | 250.0 | -40.0 | 100 V AC | 0.64 |
| MS-W6SH-R | 3.0 | 400.0 | -50.0 | 100 V AC | 0.64 |
| GS-6EA-AW | Air 6.0 (Liquid 1.3) | 98.0 | -60.0 | 100 V AC | 0.3 |
| GD-6EA-AW | Air 6.0 × 2 (Liquid 1.6) | 98.0 | -60.0 | 100 V AC | 0.3 |
The flow and pressure figures describe separate performance limits. Use the model curve to determine delivered flow at the actual pressure differential. An em dash indicates no catalog value.
Dimensions, connections and materials
| Model | H × W × L (mm) | Connection | Media-contact materials | Mass (kg) | Ambient (°C) | Insulation class |
|---|---|---|---|---|---|---|
| MW-901EEA | 90 × 80 × 130 | Rc1/8 | EPDM, PP | 0.87 | 5–40 | E |
| MW-902EEA | 90 × 80 × 130 | Rc1/8 | EPDM, PP | 0.87 | 5–40 | E |
| MS-W6ST-R-10 | 94 × 157 × 187 | Rc1/4 | SUS304, SUS316, PTFE | 2.80 | 0–40 | E |
| MS-W6ST-L-07 | 94 × 157 × 187 | Rc1/4 | SUS304, SUS316, PTFE | 2.80 | 0–40 | E |
| MS-W6SH-R | 94 × 157 × 187 | Rc1/4 | PTFE, CR, SUS304, SUS316 | 2.80 | 0–40 | E |
| GS-6EA-AW | 114 × 154 × 90 | Ø9 | EPDM, PPS | 1.70 | 0–40 | E |
| GD-6EA-AW | 114 × 120 × 90 | Ø9 | EPDM, PPS | 2.00 | 0–40 | E |
Dimensions follow the catalog comparison table and are listed as height × width × length. Check the mounting drawing for port position, mounting-hole spacing and service clearance. Confirm media compatibility using the materials listed for the exact model.
EMP product photos


