KYOWA uses cold-forged yokes for compact joints with high stiffness and controlled backlash. It lists the H series for automotive, industrial vehicle, agricultural and construction steering applications. Many assemblies are engineered to order.
Selection and application
Use the connection type, shaft interface, packaging angle, torsional load and required sealing to define the assembly. Published performance and test conditions describe representative configurations. Qualify the exact assembly for the application and use its drawing for torque and installation requirements.
Connection configurations
| Designation | Catalog configuration |
|---|---|
| HJ-RR | Weld-to-weld |
| HJ-RB | Weld-to-bolt |
| HJ-BB | Bolt-to-bolt |
| HD-RR | Double-joint configuration |
| HP | H-series designation listed in the product overview. Confirm the assembly configuration. |
Standard yoke designations
| Interface | Designations |
|---|---|
| Weld | HCY1R, HCY2R, HCY4R |
| Bolt | HCY1B, HCY2B, HCY3B, HCY4B, HCY5B, HCY6B, HYCCB |
Reference performance
| Characteristic | Published KYOWA reference |
|---|---|
| Articulation in any direction | 45° standard reference; 62° wide-angle version |
| Articulation along cross direction | 90° |
| Articulation torque | 0.02–0.14 N·m indoor; 0.08–0.20 N·m outdoor |
| Needle-bearing pull-out after durability testing | 4,900–5,600 N |
| Failure torque | 440–500 N·m |
| Grease and seal | EP2-equivalent grease; NBR seal, with indoor and outdoor versions |
KYOWA durability test examples
| Test | Load torque | Installation angle | Rate | Cycles |
|---|---|---|---|---|
| Sine-wave endurance | ±34 N·m | 35° | 260 cycles/min | 5,000,000 |
| Rotational endurance | ±34 N·m | 35° | 10 cycles/min | 30,000 |
Product images and drawings










