KYOWA is a Japanese manufacturer based in Obu, Aichi. Its history dates to 1942, and it began developing universal joints in 1952. The company’s range includes small industrial universal joints, propeller shafts and steering joints. Universal joints transmit rotation between shafts that meet at an angle. The series below cover different requirements for backlash, torque, mounting and axial travel.
Browse the range. S series · N series · F series · C series · K series · H series · Selection guide
S Series — Precision joints
SC, SD and SP. The S series is designed for applications that need close rotational accuracy and low backlash. SC is the single-joint layout, SD is the double-joint layout, and SP adds a sliding intermediate spline shaft.

KYOWA S Series | SC, SD and SP Precision Universal Joints
N Series — General-purpose joints
NC, ND and NP. The N series provides single (NC), double (ND) and intermediate-shaft (NP) layouts for general machinery. Use the dimensional tables to compare the shaft connection, installed length and available clearance.

KYOWA N Series | NC, ND and NP General-Purpose Universal Joints
F Series — Maintenance-free cross-type joints
FJ and FP. The F series covers cross-type joints designed for service without routine relubrication. Compare the FJ joint and FP shaft configurations against the application’s operating angle, speed and load.

KYOWA F Series | FJ and FP Maintenance-Free Cross-Type Universal Joints
C Series — Cross-type joints for production equipment
CF and CD. The C series covers CF and CD joints for production machinery. Check the mounting dimensions and compare the model’s permissible torque and operating angle with the actual drive conditions.

KYOWA C Series | CF and CD Cross-Type Universal Joints for Production Equipment
K Series — Industrial propeller shafts
KD and KP. KD and KP cover industrial shafts for transmitting torque between separated drives. The linked article compares catalog sizes across the 400 to 4,000 N·m range. Check the rating definition and usable operating angle for the exact shaft.

KYOWA K Series | KD and KP Industrial Propeller Shafts from 400 to 4,000 N·m
H Series — Steering universal joints
HJ, HD and HP. The H series covers steering joints made with cold-forged yokes. Use the HJ, HD and HP guide to identify the joint layout, then confirm the approved configuration and interface for the steering assembly.

KYOWA H Series | HJ, HD and HP Cold-Forged Steering Universal Joints
Quick series selection guide
| Series and types | Typical requirement | What to check first |
|---|---|---|
| S · SC, SD and SP | Precision joints | Backlash, bore, end connection and required shaft travel |
| N · NC, ND and NP | General-purpose joints | Bore, connection, joint angle and overall length |
| F · FJ and FP | Maintenance-free cross-type joints | Speed at the working angle, torque and shaft layout |
| C · CF and CD | Cross-type joints for production equipment | Torque, operating angle, speed and mounting geometry |
| K · KD and KP | Industrial propeller shafts | Flange fit, installed length, spline travel and torque rating |
| H · HJ, HD and HP | Steering universal joints | Assembly reference, yoke and spline geometry, and installed length |
For a replacement, provide the complete model code and suffix, both shaft connections, and the installed length. For a new drive, specify the running and peak torque, shaft speed, working angle at each joint and any required axial travel. Use the series guide to check the exact limits for the selected size and configuration.