The PR-AD-48 and PR-AD-50 are 24 V brushless DC rollers for powered conveyor zones. The close outside diameters have different tube walls and require the correct replacement diameter to maintain the conveyor support plane.
Installation and ordering
Select tube diameter, face width, target surface speed, drive interface and connector together. For the standard 24 V versions, connector S is JST with a 600 mm lead and M is M8 four-pin with a 1,000 mm lead. The standard drawing calls for approximately 2 mm clearance and specifies face-width tolerance of ±1 mm. The stated roller ambient range is −10 to 40 °C at 10–90% relative humidity, non-condensing. Check the controller range independently.
Reading the drive ratings
The speed code identifies a gear ratio. The speed range is adjustable on a compatible card. Compare rated tangential force for sustained running and starting force for acceleration. Speed and current vary by card. Boost data apply to cards that provide Boost mode.
Standard roller construction
| Model family | Outside diameter (mm) | Tube wall (mm) | Standard finish | Tube code | Supply |
|---|---|---|---|---|---|
| PR-AD-48 | 48.6 | 1.4 | Hot-dip Zn-Al-Mg alloy coating | Z | 24 V DC |
| PR-AD-50 | 50 | 1.5 | Hot-dip Zn-Al-Mg alloy coating | Z | 24 V DC |
Catalog speed and drive data
| Model | Mode | Speed code | Gear ratio | Speed range (m/min) | Rated / starting force (N) | Rated / starting torque (N·m) |
|---|---|---|---|---|---|---|
| PR-AD-48 | Eco | 15 | 45.00 | 1.9–19.6 | 122.2 / 674.6 | 2.9 / 16.3 |
| PR-AD-48 | Boost | 15 | 45.00 | 1.9–14.2 | 222.2 / 879.6 | 5.4 / 21.3 |
| PR-AD-48 | Eco | 20 | 32.94 | 2.6–26.8 | 89.4 / 493.8 | 2.1 / 12.0 |
| PR-AD-48 | Boost | 20 | 32.94 | 2.6–19.4 | 162.6 / 643.8 | 3.9 / 15.6 |
| PR-AD-48 | Eco | 25 | 27.00 | 3.2–32.7 | 73.3 / 404.7 | 1.7 / 9.8 |
| PR-AD-48 | Boost | 25 | 27.00 | 3.2–23.7 | 133.3 / 527.7 | 3.2 / 12.8 |
| PR-AD-48 | Eco | 35 | 18.30 | 4.8–48.3 | 49.7 / 274.3 | 1.2 / 6.6 |
| PR-AD-48 | Boost | 35 | 18.30 | 4.8–35.0 | 90.3 / 357.7 | 2.1 / 8.6 |
| PR-AD-48 | Eco | 45 | 15.00 | 5.9–59.0 | 40.7 / 224.8 | 0.9 / 5.4 |
| PR-AD-48 | Boost | 45 | 15.00 | 5.9–42.7 | 74.0 / 293.2 | 1.8 / 7.1 |
| PR-AD-48 | Eco | 60 | 10.98 | 8.0–80.6 | 29.8 / 164.6 | 0.7 / 4.0 |
| PR-AD-48 | Boost | 60 | 10.98 | 8.0–58.4 | 54.2 / 214.6 | 1.3 / 5.2 |
| PR-AD-48 | Eco | 75 | 9.00 | 9.8–98.3 | 24.4 / 134.9 | 0.5 / 3.2 |
| PR-AD-48 | Boost | 75 | 9.00 | 9.8–71.2 | 44.4 / 175.9 | 1.0 / 4.2 |
| PR-AD-48 | Eco | 95 | 6.82 | 12.9–129.8 | 18.5 / 102.2 | 0.4 / 2.4 |
| PR-AD-48 | Boost | 95 | 6.82 | 12.9–94.0 | 33.6 / 133.2 | 0.8 / 3.2 |
| PR-AD-50 | Eco | 15 | 45.00 | 2.0–20.2 | 118.8 / 655.7 | 2.9 / 16.3 |
| PR-AD-50 | Boost | 15 | 45.00 | 2.0–14.6 | 216.0 / 855.0 | 5.4 / 21.3 |
| PR-AD-50 | Eco | 20 | 32.94 | 2.7–27.6 | 86.9 / 480.0 | 2.1 / 12.0 |
| PR-AD-50 | Boost | 20 | 32.94 | 2.7–20.0 | 158.1 / 625.8 | 3.9 / 15.6 |
| PR-AD-50 | Eco | 25 | 27.00 | 3.3–33.7 | 71.2 / 393.4 | 1.7 / 9.8 |
| PR-AD-50 | Boost | 25 | 27.00 | 3.3–24.4 | 129.6 / 513.0 | 3.2 / 12.8 |
| PR-AD-50 | Eco | 35 | 18.30 | 4.9–49.7 | 48.3 / 266.6 | 1.2 / 6.6 |
| PR-AD-50 | Boost | 35 | 18.30 | 4.9–36.0 | 87.8 / 347.7 | 2.1 / 8.6 |
| PR-AD-50 | Eco | 45 | 15.00 | 6.0–60.7 | 39.6 / 218.5 | 0.9 / 5.4 |
| PR-AD-50 | Boost | 45 | 15.00 | 6.0–43.9 | 72.0 / 285.0 | 1.8 / 7.1 |
| PR-AD-50 | Eco | 60 | 10.98 | 8.2–82.9 | 28.9 / 160.0 | 0.7 / 4.0 |
| PR-AD-50 | Boost | 60 | 10.98 | 8.2–60.0 | 52.7 / 208.6 | 1.3 / 5.2 |
| PR-AD-50 | Eco | 75 | 9.00 | 10.1–101.2 | 23.7 / 131.1 | 0.5 / 3.2 |
| PR-AD-50 | Boost | 75 | 9.00 | 10.1–73.3 | 43.2 / 171.0 | 1.0 / 4.2 |
| PR-AD-50 | Eco | 95 | 6.82 | 13.3–133.6 | 17.9 / 99.3 | 0.4 / 2.4 |
| PR-AD-50 | Boost | 95 | 6.82 | 13.3–96.7 | 32.7 / 129.5 | 0.8 / 3.2 |
Product images

