The PR-AD-57 and PR-AD-60 extend the 24 V SENERGY range to 57 and 60.5 mm. The 60.5 mm tube has a thicker wall. Choose on the basis of load, available drive force, gearing, mounting width and the required linked-roller hardware.
Installation and ordering
Select tube diameter, face width, target surface speed, drive interface and connector together. For the standard 24 V versions, connector S is JST with a 600 mm lead and M is M8 four-pin with a 1,000 mm lead. The standard drawing calls for approximately 2 mm clearance and specifies face-width tolerance of ±1 mm. The stated roller ambient range is −10 to 40 °C at 10–90% relative humidity, non-condensing. Check the controller range independently.
Reading the drive ratings
The speed code identifies a gear ratio. The speed range is adjustable on a compatible card. Compare rated tangential force for sustained running and starting force for acceleration. Speed and current vary by card. Boost data apply to cards that provide Boost mode.
Standard roller construction
| Model family | Outside diameter (mm) | Tube wall (mm) | Standard finish | Tube code | Supply |
|---|---|---|---|---|---|
| PR-AD-57 | 57 | 1.5 | Trivalent chromate | A | 24 V DC |
| PR-AD-60 | 60.5 | 3.25 | Trivalent chromate | A | 24 V DC |
Catalog speed and drive data
| Model | Mode | Speed code | Gear ratio | Speed range (m/min) | Rated / starting force (N) | Rated / starting torque (N·m) |
|---|---|---|---|---|---|---|
| PR-AD-57 | Eco | 15 | 45.00 | 2.3–23.0 | 104.2 / 575.2 | 2.9 / 16.3 |
| PR-AD-57 | Boost | 15 | 45.00 | 2.3–16.7 | 189.4 / 750.0 | 5.4 / 21.3 |
| PR-AD-57 | Eco | 20 | 32.94 | 3.1–31.5 | 76.2 / 421.0 | 2.1 / 12.0 |
| PR-AD-57 | Boost | 20 | 32.94 | 3.1–22.8 | 138.6 / 549.0 | 3.9 / 15.6 |
| PR-AD-57 | Eco | 25 | 27.00 | 3.8–38.4 | 63.5 / 345.1 | 1.7 / 9.8 |
| PR-AD-57 | Boost | 25 | 27.00 | 3.8–27.8 | 113.6 / 450.0 | 3.2 / 12.8 |
| PR-AD-57 | Eco | 35 | 18.30 | 5.6–56.7 | 42.3 / 233.9 | 1.2 / 6.6 |
| PR-AD-57 | Boost | 35 | 18.30 | 5.6–41.0 | 77.0 / 305.0 | 2.1 / 8.6 |
| PR-AD-57 | Eco | 45 | 15.00 | 6.9–69.2 | 34.7 / 191.7 | 0.9 / 5.4 |
| PR-AD-57 | Boost | 45 | 15.00 | 6.9–50.1 | 63.1 / 250.0 | 1.8 / 7.1 |
| PR-AD-57 | Eco | 60 | 10.98 | 9.4–94.5 | 25.4 / 140.3 | 0.7 / 4.0 |
| PR-AD-57 | Boost | 60 | 10.98 | 9.4–68.4 | 46.2 / 183.0 | 1.3 / 5.2 |
| PR-AD-57 | Eco | 75 | 9.00 | 11.5–115.4 | 20.8 / 115.0 | 0.5 / 3.2 |
| PR-AD-57 | Boost | 75 | 9.00 | 11.5–83.5 | 37.8 / 150.0 | 1.0 / 4.2 |
| PR-AD-57 | Eco | 95 | 6.82 | 15.2–152.3 | 15.7 / 87.1 | 0.4 / 2.4 |
| PR-AD-57 | Boost | 95 | 6.82 | 15.2–110.3 | 28.7 / 113.6 | 0.8 / 3.2 |
| PR-AD-60 | Eco | 15 | 45.00 | 2.4–24.4 | 98.1 / 541.9 | 2.9 / 16.3 |
| PR-AD-60 | Boost | 15 | 45.00 | 2.4–17.7 | 178.5 / 706.6 | 5.4 / 21.3 |
| PR-AD-60 | Eco | 20 | 32.94 | 3.3–33.4 | 71.8 / 396.6 | 2.1 / 12.0 |
| PR-AD-60 | Boost | 20 | 32.94 | 3.3–24.2 | 130.6 / 517.2 | 3.9 / 15.6 |
| PR-AD-60 | Eco | 25 | 27.00 | 4.0–40.8 | 58.9 / 325.1 | 1.7 / 9.8 |
| PR-AD-60 | Boost | 25 | 27.00 | 4.0–29.5 | 107.1 / 325.1 | 3.2 / 12.8 |
| PR-AD-60 | Eco | 35 | 18.30 | 6.0–60.2 | 39.9 / 220.3 | 1.2 / 6.6 |
| PR-AD-60 | Boost | 35 | 18.30 | 6.0–43.6 | 72.5 / 287.3 | 2.1 / 8.6 |
| PR-AD-60 | Eco | 45 | 15.00 | 7.3–73.4 | 32.7 / 180.6 | 0.9 / 5.4 |
| PR-AD-60 | Boost | 45 | 15.00 | 7.3–53.2 | 59.5 / 235.5 | 1.8 / 7.1 |
| PR-AD-60 | Eco | 60 | 10.98 | 10.0–100.3 | 23.9 / 132.2 | 0.7 / 4.0 |
| PR-AD-60 | Boost | 60 | 10.98 | 10.0–72.7 | 43.5 / 172.4 | 1.3 / 5.2 |
| PR-AD-60 | Eco | 75 | 9.00 | 12.2–122.4 | 19.6 / 108.3 | 0.5 / 3.2 |
| PR-AD-60 | Boost | 75 | 9.00 | 12.2–88.6 | 35.7 / 141.3 | 1.0 / 4.2 |
| PR-AD-60 | Eco | 95 | 6.82 | 16.1–161.6 | 14.8 / 82.1 | 0.4 / 2.4 |
| PR-AD-60 | Boost | 95 | 6.82 | 16.1–117.0 | 27.0 / 107.0 | 0.8 / 3.2 |
Product images

