KYOWA lists two 24 V brushless tapered rollers for curved conveyor sections. PR-TD-42 starts at 42.7 mm and is drawn for a 900 mm inside radius. PR-TD-52 starts at 52 mm and is drawn for a 1,100 mm inside radius.
Curve geometry
The table pairs catalog face widths with their large-end diameters. Check the small end, large end, curve radius and frame drawing together when specifying a replacement. The tube surface speed varies along the taper.
Installation and ordering
Select tube diameter, face width, target surface speed, drive interface and connector together. For the standard 24 V versions, connector S is JST with a 600 mm lead and M is M8 four-pin with a 1,000 mm lead. The standard drawing calls for approximately 2 mm clearance and specifies face-width tolerance of ±1 mm. The stated roller ambient range is −10 to 40 °C at 10–90% relative humidity, non-condensing. Check the controller range independently.
Reading the drive ratings
The speed code identifies a gear ratio. The speed range is adjustable on a compatible card. Compare rated tangential force for sustained running and starting force for acceleration. Speed and current vary by card. Boost data apply to cards that provide Boost mode.
Tube geometry
| Model | Inside radius (mm) | Small end (mm) | Face width (mm) | Large end (mm) |
|---|---|---|---|---|
| PR-TD-42 | 900 | 42.7 | 355 | 60.0 |
| PR-TD-42 | 900 | 42.7 | 400 | 62.0 |
| PR-TD-42 | 900 | 42.7 | 500 | 66.8 |
| PR-TD-42 | 900 | 42.7 | 600 | 72.0 |
| PR-TD-42 | 900 | 42.7 | 700 | 76.3 |
| PR-TD-42 | 900 | 42.7 | 800 | 80.0 |
| PR-TD-52 | 1,100 | 52.0 | 305 | 66.1 |
| PR-TD-52 | 1,100 | 52.0 | 400 | 71.0 |
| PR-TD-52 | 1,100 | 52.0 | 499 | 75.7 |
Catalog speed and drive data
| Model | Mode | Speed code | Gear ratio | Speed range (m/min) | Rated / starting force (N) | Rated / starting torque (N·m) |
|---|---|---|---|---|---|---|
| PR-TD-42 | Eco | 15 | 45.00 | 2.3–23.0 | 104.2 / 575.2 | 2.9 / 16.3 |
| PR-TD-42 | Boost | 15 | 45.00 | 2.3–16.7 | 189.4 / 750.0 | 5.4 / 21.3 |
| PR-TD-42 | Eco | 20 | 32.94 | 3.1–31.5 | 76.2 / 421.0 | 2.1 / 12.0 |
| PR-TD-42 | Boost | 20 | 32.94 | 3.1–22.8 | 138.6 / 549.0 | 3.9 / 15.6 |
| PR-TD-42 | Eco | 25 | 27.00 | 3.8–38.4 | 62.5 / 345.1 | 1.7 / 9.8 |
| PR-TD-42 | Boost | 25 | 27.00 | 3.8–27.8 | 113.6 / 450.0 | 3.2 / 12.8 |
| PR-TD-42 | Eco | 35 | 18.30 | 5.6–56.7 | 42.3 / 233.9 | 1.2 / 6.6 |
| PR-TD-42 | Boost | 35 | 18.30 | 5.6–41.0 | 77.0 / 305.0 | 2.1 / 8.6 |
| PR-TD-42 | Eco | 45 | 15.00 | 6.9–69.2 | 34.7 / 191.7 | 0.9 / 5.4 |
| PR-TD-42 | Boost | 45 | 15.00 | 6.9–50.1 | 63.1 / 250.0 | 1.8 / 7.1 |
| PR-TD-42 | Eco | 60 | 10.98 | 9.4–94.5 | 25.4 / 140.3 | 0.7 / 4.0 |
| PR-TD-42 | Boost | 60 | 10.98 | 9.4–68.4 | 46.2 / 183.0 | 1.3 / 5.2 |
| PR-TD-42 | Eco | 75 | 9.00 | 11.5–115.4 | 20.8 / 115.0 | 0.5 / 3.2 |
| PR-TD-42 | Boost | 75 | 9.00 | 11.5–83.5 | 37.8 / 150.0 | 1.0 / 4.2 |
| PR-TD-42 | Eco | 95 | 6.82 | 15.2–152.3 | 15.7 / 87.1 | 0.4 / 2.4 |
| PR-TD-42 | Boost | 95 | 6.82 | 15.2–110.3 | 28.7 / 113.6 | 0.8 / 3.2 |
| PR-TD-52 | Eco | 15 | 45.00 | 2.4–24.9 | 96.5 / 533.1 | 2.9 / 16.3 |
| PR-TD-52 | Boost | 15 | 45.00 | 2.4–18.0 | 175.6 / 695.1 | 5.4 / 21.3 |
| PR-TD-52 | Eco | 20 | 32.94 | 3.4–34.0 | 70.7 / 390.2 | 2.1 / 12.0 |
| PR-TD-52 | Boost | 20 | 32.94 | 3.4–24.6 | 128.5 / 508.8 | 3.9 / 15.6 |
| PR-TD-52 | Eco | 25 | 27.00 | 4.1–41.5 | 57.9 / 319.8 | 1.7 / 9.8 |
| PR-TD-52 | Boost | 25 | 27.00 | 4.1–30.0 | 105.3 / 417.0 | 3.2 / 12.8 |
| PR-TD-52 | Eco | 35 | 18.30 | 6.1–61.2 | 39.2 / 216.8 | 1.2 / 6.6 |
| PR-TD-52 | Boost | 35 | 18.30 | 6.1–44.3 | 71.4 / 282.6 | 2.1 / 8.6 |
| PR-TD-52 | Eco | 45 | 15.00 | 7.4–74.7 | 32.1 / 177.7 | 0.9 / 5.4 |
| PR-TD-52 | Boost | 45 | 15.00 | 7.4–54.0 | 58.5 / 231.7 | 1.8 / 7.1 |
| PR-TD-52 | Eco | 60 | 10.98 | 10.2–102.0 | 23.5 / 130.0 | 0.7 / 4.0 |
| PR-TD-52 | Boost | 60 | 10.98 | 10.2–73.9 | 42.8 / 169.6 | 1.3 / 5.2 |
| PR-TD-52 | Eco | 75 | 9.00 | 12.4–124.5 | 19.3 / 106.6 | 0.5 / 3.2 |
| PR-TD-52 | Boost | 75 | 9.00 | 12.4–90.1 | 35.1 / 139.0 | 1.0 / 4.2 |
| PR-TD-52 | Eco | 95 | 6.82 | 16.4–164.3 | 14.6 / 80.7 | 0.4 / 2.4 |
| PR-TD-52 | Boost | 95 | 6.82 | 16.4–119.0 | 26.6 / 105.3 | 0.8 / 3.2 |
Product images

