The 48 V branch of the SENERGY range uses a four-pin M8 motor connection and a 48 V driver. KYOWA’s order-code table identifies the X connector as Senergy-X. The 48 V product sheet also uses the designation Senergy-Ai48.
Order code and interface
The standard pattern is PR-AD-[diameter]-[face width]-[speed] [tube code]XAQ. In that example, X denotes the 48 V four-pin M8 connector, A the standard linked-roller field and Q the 48 V special specification field. The standard motor cable is 1,000 mm. The catalog identifies ConveyLinx-Ai2-48 and ConveyLinx-Ai3-48-FC as companion cards.
Selection limits
The 48 V catalog excludes speed codes 25, 75 and 95 and excludes the brake version. Verify the minimum face width for the selected drive hardware and the maximum number of simultaneously starting zones when sizing the DC power supply. Check motor voltage and card voltage as well as connector fit.
Standard tube sizes
| Model family | Outside diameter (mm) | Standard finish | Standard tube code |
|---|---|---|---|
| PR-AD-48 | 48.6 | Hot-dip Zn-Al-Mg alloy coating | Z |
| PR-AD-50 | 50 | Hot-dip Zn-Al-Mg alloy coating | Z |
| PR-AD-57 | 57 | Trivalent chromate | A |
| PR-AD-60 | 60.5 | Trivalent chromate | A |
Electrical and operating details
| Item | Catalog specification |
|---|---|
| Supply | 48 V DC |
| Connector | X, four-pin M8 |
| Separate specification field | Q |
| Standard cable | 1,000 mm |
| Roller ambient | −10 to 40 °C, 10–90% RH, non-condensing |
Product images


