KYOWA’s pallet-conveyor rollers use 60.5 and 76.3 mm tube options. Specification P identifies the standard pallet arrangement. Specification L selects the pallet arrangement with brake.
Shaft and frame selection
The catalog lists sliding and non-sliding shaft variants with different minimum face widths. Add 20 mm to the listed manufacture minimum when ordering the M8 four-pin connector. The width table applies to the catalog standard and sprocket configurations. The pallet drawing calls for approximately 4 mm of clearance at the frame and a face-width tolerance of ±1 mm.
Load and interface
Use the width-specific static load data and allow additional margin for impact loads. The catalog shows static load falling with longer tubes. Evaluate package support, drive force and any brake hold requirement independently. These rollers run on 24 V DC. The standard lead lengths are 500 mm for JST and 900 mm for the M8 four-pin option.
Dimensions and manufacturing widths
| Model | Tube Ø × wall (mm) | Minimum width, slide shaft (mm) | Minimum width, non-slide shaft (mm) | Maximum width (mm) |
|---|---|---|---|---|
| PR-PD-60 | 60.5 × 3.25 | 450 | 350 | 1,500 |
| PR-LD-60 | 60.5 × 3.25 | 480 | 420 | 1,500 |
| PR-PD-76 | 76.3 × 3.15 | 450 | 350 | 1,500 |
| PR-LD-76 | 76.3 × 3.15 | 480 | 420 | 1,500 |
Product images

