KYOWA uses a specification letter ahead of the fixed D field to identify special 24 V SENERGY rollers. These variants cover braking, wet environments, low temperatures, stainless exterior components and one-way rotation.
Mechanical options
Identify the roller specification before applying the liner and idler-drive suffixes. In the linked-idler field, D indicates a sprocket, E a single sprocket, F a round pulley, G a round groove and H a Micro-V pulley. Availability and minimum width depend on the roller’s diameter, speed code, shaft and end hardware.
Environmental and brake matching
The roller sealing rating applies to the specified roller construction. Verify the controller, connector and enclosure for the installation separately. For specified brake models, check the brake-capable card and connector. Direction for the one-way types is defined looking from the cable side.
Catalog option families
| Family | Specification | Scope or constraint |
|---|---|---|
| PR-BD | Brake | Ø48.6, Ø50, Ø57 and Ø60.5 mm, 24 V DC; JST code S on the catalog pattern |
| PR-WD | IP66 waterproof | Ø48.6, Ø50, Ø57 and Ø60.5 mm; SUS304 tube |
| PR-QD | IP69K waterproof | Catalog lists Ø50 mm |
| PR-ZD | Low-temperature option | −30 to 40 °C, non-condensing |
| PR-ID | Stainless exterior | SUS304 tube; I specifies stainless exterior components |
| PR-CD | One-way, right rotation | Viewed from cable side |
| PR-GD | One-way, left rotation | Viewed from cable side |
Product images

