Satuma Electric Manufacturing Co., Ltd. is an industrial brake manufacturer founded in 1970 and based in Numazu, Shizuoka, Japan. Its motor brake range serves cranes, general industrial machinery, water gates and steel rolling equipment. The guides below cover drum and disc brakes, electrohydraulic thrusters and replacement parts.
Browse the range. Electromagnetic drum brakes · Mu-Lifter drum brakes and AL control · BRP2 and PB3/PL3 disc brakes · Linings, pads and service parts · Selection guide
Electromagnetic drum brakes
BRS5 uses an AC supply and a dedicated control box to drive the DC electromagnet. Applying power releases the brake. BDS5 uses DC excitation and requires a compatible controller for the pull-in and holding stages. Both guides cover model sizes and suffixes for matching a replacement.


- SATUMA BRS5-1316 to BRS5-4056L-2 AC-Operated DC Electromagnetic Drum Brakes
- SATUMA BDS5-1720 to BDS5-5276L DC Electromagnetic Drum Brakes
Mu-Lifter drum brakes and AL control
BMS5-T and BMS5-WT use a Mu-Lifter electrohydraulic thruster. The WT version adds adjustment of the thruster descent time and is used for duties such as crane travel and conveyor stopping. BFS5-T is an AL brake for speed control on compatible wound-rotor induction motor systems.


- SATUMA BMS5-1316T to BMS5-5276T Mu-Lifter Drum Brakes
- SATUMA BMS5-1316WT to BMS5-5276WT Adjustable-Descent Mu-Lifter Drum Brakes
- SATUMA BFS5-1620T-1 to BFS5-3145T Adjustable Lowering Control Brakes
BRP2 and PB3/PL3 disc brakes
BRP2 is an AC-operated DC electromagnetic disc brake for motor drives that use controls such as regenerative braking. The PB3 guide covers pad-type disc brakes with power-off braking and lists PL3 holding models. Match rotor dimensions and mounting, then confirm whether the model is intended to stop, hold or perform both duties.


- SATUMA BRP2-180, BRP2-225, BRP2-280 and BRP2-355 AC-Operated Disc Brakes
- SATUMA PB3-3, PB3-6 and PB3-12 Pad Disc Brakes with PL3 Holding Models
Linings, pads and service parts
SATUMA lists drum brake linings, disc brake pads, electromagnets, control boxes and other service parts. The linked guide also covers BRD control boxes and Mu-Lifter parts. Use the complete brake and component codes to identify a replacement.

Quick brake selection guide
| Product family | What to check first |
|---|---|
| Electromagnetic drum brakes | Drum diameter, torque, mounting and control box or DC supply |
| Mu-Lifter drum brakes and AL control | Drum size, thruster model, stopping duty and drive compatibility |
| BRP2 and PB3/PL3 disc brakes | Rotor diameter and thickness, torque, electrical supply and stopping or holding duty |
| Linings, pads and service parts | Brake model and suffix, friction material dimensions and electrical rating |
For replacement enquiries, provide the full model and suffix, a nameplate photo, and the drum or rotor dimensions. For a new installation, specify the required brake torque, shaft speed, stops per hour, available supply, mounting arrangement, and whether the brake must stop a moving load, hold it in position, or do both.