The MR-60 designation corresponds to a Ø60.5 mm tube. The family offers standard single- and three-phase models and a higher-output three-phase 200 V model.
Selection and fit
The catalog describes the high-output motor as approximately twice the standard output. Check the proper reference table for current, starting effort and speed. The linked-idler catalog excludes round-groove manufacture on Ø60.5 mm. Verify the exact mechanical alternative when integrating adjacent rollers. Check the required face width, the frame clearance and the minimum width for the selected speed, gearbox and options before completing the order code.
Reading the reference table
These are catalog reference values for the specified standard three-phase 200 V configuration. The nominal speed code identifies the gearing. Actual surface speed changes with load and frequency. Compare starting force and rated force separately.
Catalog motor configurations
| Diameter (mm) | Order-code family | Motor code | Catalog supply / variant |
|---|---|---|---|
| 60.5 | MR-A1-60 | B | 100 V class, single-phase |
| 60.5 | MR-A1-60 | Q | 200 V class, single-phase |
| 60.5 | MR-A3-60 | A | 200 V class, three-phase |
| 60.5 | MR-A3-60 | G | 400 V class, three-phase |
| 60.5 | MR-A3-60 | H | 200 V class, three-phase, high output |
Standard three-phase reference point
| Size | Nominal speed code | Rated speed 50 / 60 Hz (m/min) | Rated tangential force 50 / 60 Hz (N) | Starting tangential force 50 / 60 Hz (N) | Rated torque 50 / 60 Hz (N·cm) |
|---|---|---|---|---|---|
| MR-60 | 30 | 26.9 / 31.9 | 18.6 / 15.5 | 34.8 / 31.3 | 56.2 / 46.8 |
Product images

